- 11 -
Controls and Their Functions
12)
Air Cleanout Valve (optional):
Connect air line or solvent line to this connector to
flush out system. This valve should remain closed at all times other than cleanout.
13)
Temperature Control Box:
This control allows the operator to set the desired oil
temperature. The setting will be maintained automatically.
14)
Engine Throttle:
Refer to Engine Manual for start up and maintenance procedures.
15)
Cabinet Temperature Gauge:
Indicates the temperature inside the cabinet. Do not
exceed 320º F. If conditions permit exceeding this temperature, open cabinet door.
16)
Thermal Regulating Gate:
Lift lever (A) to open gate (B) which will direct hot air to
cabinet to heat pump and plumbing.
17)
Battery Box:
Battery and related electrical components are located inside.
18)
Ignition Access Door:
On Diesel models, lift this door for access to ignition key.
19)
Wand Holder:
On models with the electrically heated hose, the wand is placed into
this holder.
1
7
12
8
19
6
15
13
4
2
16
3
10
9
14
11
18
17
