CIGWELD Transmig 355i, Operating Manual

Page: 17 / 116

OPERATING MANUAL
Transmig 220i
Manual 0-5586 2-3 INTRODUCTION
2.05 Description
CIGWELD’s Transmig 355i is a Compact 3in1
MultiProcess Inverter that offers exceptional welding
results across MIG, STICK and TIG.
The Transmig 355i is loaded with advanced features
to get the best out of your welding performance while
also helping to make welding easy with the added
convenience of CIGWELD’s AUTO SET feature. The
AUTO SET Process has been pre-programmed with
synergic lines determined by material type, thickness
and consumable diameter to ensure you are always
getting the best from your welds.
2.06 User Responsibility
This equipment will perform as per the information
contained herein when installed, operated, maintained
and repaired in accordance with the instructions
provided. This equipment must be checked periodically.
Defective equipment (including welding leads) should
not be used. Parts that are broken, missing, plainly
worn, distorted or contaminated, should be replaced
immediately. Should such repairs or replacements
become necessary, it is recommended that such
repairs be carried out by appropriately qualified
persons approved by CIGWELD. Advice in this regard
can be obtained by contacting an Accredited CIGWELD
Distributor.
This equipment or any of its parts should not be altered
from standard specification without prior written
approval of CIGWELD. The user of this equipment
shall have the sole responsibility for any malfunction
which results from improper use or unauthorized
modification from standard specification, faulty
maintenance, damage or improper repair by anyone
other than appropriately qualified persons approved
by CIGWELD.
2.07 Transporting Methods
WARNING
ELECTRIC SHOCK can kill. DO NOT TOUCH live elec-
trical parts. Disconnect input power conductors
from de-energized supply line before moving the
welding power source.
!!
WARNING
FALLING EQUIPMENT can cause serious personal
injury and equipment damage.
Use handcart or similar device of adequate capacity.
If using a fork lift vehicle, place and secure unit on a
proper skid before transporting.
2.08 Packaged Items
Transmig 355i Compact Plant (Part No. W1003511)
• Transmig 355i Inverter Power Source
• Feedroll 0.9/1.2mm V Groove (Fitted)
• Tweco Fusion 400 Mig Torch 3.6m
• Comet Professional Argon Regulator / Flowmeter
• Work Clamp with 4m Lead
• Shielding Gas Hose Assembly
• Operation Manual
Transmig 355i Remote Plant (Part No. W1003510)
• Transmig 355i Inverter Power Source
• Feedroll 0.9/1.2mm V Groove (Fitted)
• Transmig 4RX Wirefeeder
• 8m Interconnection Lead
• Tweco Fusion 400 Mig Torch 3.6m
• Comet Professional Argon Regulator / Flowmeter
• Work Clamp with 4m Lead
• Heavy Duty Trolley with inbuilt cylinder carrier
• Shielding Gas Hose Assembly
• Operation Manual