CI-202 Instruction Manual rev. 6/21/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA
Phone (360) 833-8835 Fax (360) 833-1914
14
In the format storage mode,
the top line of the display will read “Clear all data”. The bottom line
of the display will have the word “stop” to the left and “enter” to the right.
Clear all data
<stop> <erase>
To delete every file in your instrument, press the ENTER key. The instrument will erase all data
from memory, leaving the maximum possible amount of memory for use. To stop the deleting
process, press the STOP key.
NOTE: When there are no files to store data to, the measurement menu items will not be
available.
To correct this situation, create a file.
Set-Up Auto Store Parameter
Pressing the START/ENTER key when “Setup auto store” is displayed indicates the unit is in
the
setup auto store
mode. This allows the user to set-up the instrument to automatically store
measurements, and to start a new measurement without explicitly saving the old one. This
mode is convenient when taking fast, repetitive measurements and when it is not necessary to
review each measurement.
In the
auto store setup
mode, the top line of the display will read “auto store =” on the left and
either “yes” or “no” on the right. The bottom line of the display will read “stop” and “save” and
the directional arrows.
auto save = yes
<stop> <save>
To set the instrument up to automatically store measurements press, the Up-arrow key to bring
the word “yes” onto the display, then press the SAVE key to save the configuration. To set the
instrument up to automatically discard measurements, press the DOWN arrow key to bring the
word “no” onto the display, then press the SAVE key to save the configuration. To avoid
changing the configuration, press the STOP key.
