6.1
Web interface
The CONNECT TOUCH control provides the functionality
to access and control unit parameters from a web interface.
To connect to the controller via the web interface, it is necessary
to know the IP address of the unit.
To verify unit IP address:
1. Go to the System menu.
2. Select
Network
(NETWORK).
3. Verify TCP/IP Address for “IP Network Interface J5 (eth0)”.
■
Unit default address:
169.254.1.1 (J5, eth0)
■
The unit IP address can be changed.
To access CONNECT TOUCH web interface:
1. Open the web browser.
2. Enter the IP address of the unit in the address bar of the web
browser. Start with
https://
followed by the unit IP address.
Example: https://169.254.1.1
3. Press Enter.
4. The web interface will be loaded.
IMPORTANT: Three users can be connected simultaneously
with no priority between them. The last modification is
always taken into account.
Minimum web browser configuration:
■
Internet Explorer (version 11 or higher)
■
Mozilla Firefox (version 60 or higher)
■
Google Chrome (version 65 or higher)
For security reasons the unit cannot be started / stopped via the
web interface. All other operations, including monitoring unit
parameters or unit configuration, can be performed via the web
browser interface.
Make sure that your network is protected from malicious
attacks and any other security threats. Do not provide
open access without proper network security safeguards.
The manufacturer does not hold any responsibility or
liability for damage caused by security breach.
6.2
Technical documentation
When using the CONNECT TOUCH control via a PC web
browser, you may easily access all technical documents related
to the product and its components.
Once you connect to the CONNECT TOUCH control, click the
Technical documentation
button
in order to see a list of
documents related to the unit.
Technical documentation includes the following documents:
■
Spare parts documentation: The list of spare parts included
in the unit with reference, description and drafting.
■
Misc: Documents such as electrical plans, dimension plans,
unit certificates.
■
PED: Pressure Equipment Directive.
■
IOM: Installation operation and maintenance manual, controls
installation/maintenance manual.
Click the
Help
button
to get access to BACnet user guide,
Modbus user guide and Open Source Licenses used by
CONNECT TOUCH.
IMPORTANT: Please save all data (documents, drawings,
diagrams, etc.), for example, on your computer. If the
display is replaced, all documents will be lost. Make sure
that all documents are stored and may be accessed at
any time.
6 - WEB CONNECTION
EN-21 AQUACIAT
POWER
