35
Before powering on the unit, make sure the HDD cartridge has been locked, and the POWER
LED is red color now. After pressing POWER button, POWER LED will turn to green, then all
other LED light will turn to RED except the LED for HDD. OSD screen will display “HDD
Detecting”; Power on running time will take approximately 15 to 20 seconds.
4.2 Recording
Your DQR offers a variety of flexible recording modes. You can set it up to record continually,
scheduled time, or by record events, and you can also set up recording speed and resolution.
You can set these options by selecting MENU and SYSTEM before recording. Under the
recording status, if power is stopped accidentally, recorded video will still be stored in the
HDD after power return. DQR will continue with original recording setup after power return.
There are 3 record modes for DQR: Alarm Record, Timer Record, and Manual Record. All
record Modes descriptions in followings.
4.2.1 Alarm Record
When DQR is triggered by alarm input, it will start to record immediately.
The screen will be as right displayed.
A : Alarm trigger
OW : HDD Over Write
032GB : If the OW location shows 32GB, it
means that 32 GB HDD left for video
recording.
2002-JAN-01 01:02:03
A
●
OW
CH1 CH2
CH3 CH4
4.2.2 Timer Record
DQR will follow “Timer” setup when record. The recording speed and quality will be
determined by “ Timer” recording mode setup in main menu.
