How to maintain the product
To maintain optimum product performance, always clean the product before
and after use, and if necessary, also during the treatment.
Caution
● Wipe off any dirt with a dry cloth. If the dirt is difficult to remove, wipe it
off with a moistened, tightly wrung cloth, and then wipe off the moisture.
Never soak the main unit, power adapter or attachment in water or
wash them with water as this may cause damage.
● Never use compressed air, abrasive pads, abrasive cleaning agents,
or highly irritating liquids such as petrol and acetone.
● Do not scratch the light exit window with integrated filter or the metal
parts inside it.
● Stop using the product when it is no longer possible to clean the
attachment or the light exit window with integrated filter.
1
.
Turn off the power of the product, unplug it and let it
cool down.
*The light exit window with integrated filter becomes hot
during use. Be sure to let it cool down before cleaning.
2
.
Hold the sides of the attachment with your fingers
and pull gently to remove it from the main body.
The attachment can be removed without applying
excessive force.
3
.
Moisten a cloth or tissue with a few drops of water and
use it to clean the following parts.
・
The light exit window with integrated filter
・
The metal parts inside the attachment
・
The outside surface of the attachment
*If it is difficult to clean the fine parts of the attachment,
you can use a cotton swab, but be careful not to leave
any fibers.
4
.
If necessary, wipe the outside surface of the main body
with a dry cloth.
How to store the product
1
.
Turn off the power of the product, unplug it and let it cool down.
2
.
Clean the product.
3
.
Store at a temperature between 0
℃
and 40
℃
away from dust, high temperatures,
and humidity.
Summary of Contents for Photo EPC
Page 18: ......
