Chziri ZVF300H, User Manual

Page: 36 / 219

G011T2, G022T4 and the smaller power inverters are equipped with a built-in
braking unit. When an external braking resistor is required, an external braking
resistor can be connected between P and DB terminals; G015
～
G037T2 and
G030
～
G75T4 inverters are optional to install built-in braking unit, After installation,
an external braking resistor can be connected between terminal P and DB;
G045T2, G090T4 and bigger power inverters have no built-in braking unit, so
there is no DB terminal. If you need to install the braking torque, please connect
external braking assembly between P and DC -(including braking unit and braking
resistor) .
G022T2
～
G110T2, G045T4
～
P350T4 are wall-mounted installation
.
without a built
-in DC reactor. For models with terminals P and DC+ , you can add a DC reactor
between P and DC+ when needed. When adding connections, remove the short
circuit ring first, then connect the reactor.
G160T2,
G280T4/P315T4 and the bigger power inverters are cabinet installation,
built-in DC reactor.
External DC reactor terminal, connect to both ends of the DC
reactor