ZRMV
高压固态软起动装置说明书
User’s Manual for ZRMV High Voltage Solid Soft Starter
11
motor. It can put into operation only with the power line and motor line connected. The whole system can be tested
electrically under low voltage before operating with high voltage.
备份特性：装置内部装有可直接起动电机的真空接触器，如果
ZRMV
出现故障，可利用真空接触器直
接起动电机，以保证生产的连续性。
Backup
：
：
：
：
The starter comes equipped with a vacuum contactor which can be used to start the motor directly in
the inside. If ZRMV fails, the vacuum contactor can be used to start the motor directly to ensure the continuity of
the production.
以高压晶闸管为主回路部件，并具有均压保护和过电压保护系统。
High voltage thyristor is a component of major loop, equipped with voltage balancing protection system and
over-voltage protection system.
ZRMV
安装电磁闭锁装置，防止在带电情况下误入高压装置内。
ZRMV comes equipped with an electromagnetic blocking device for fear of entering the high voltage device
in the electrified state.
先进的光纤传输技术，实现高压晶闸管的触发检测与低压控制回路之间的隔离。
Advanced optical fiber transmission technique realizes the triggering detection of high voltage thyristor and
the isolation between LV control loops.
采用
32
位
ARM
核微控制器执行中心控制，控制实时高效、可靠性高、稳定性好。
32-bit ARM-core microcontroller is used to perform central control which is real-time and high efficient with ,
high reliability and excellent stability
.
中
/
英文液晶
\
触摸屏显示系统，操作界面人性化。
LCD/touch screen display system in both Chinese and English with human-friendly operation interface.
具有
RS-485
通讯接口，可与上位机或集中控制中心进行通信。
RS-485 communication port can be used to communicate with the upper computer or centralized control
center.
所有电路板均经过严格的老化实验。
Aging experiments are made on all circuit boards.
第
第
第
第二
二
二
二章
章
章
章
操作
操作
操作
操作说明
说明
说明
说明
Section 2 Operating Instructions
2.1
面板说明
面板说明
面板说明
面板说明（
（
（
（
Panel introduction
）
）
）
）
本装置面板有以下几元件组成
:
The device panel is composed of following elements:
a) LCD
人机界面
a) LCD man-machine interface
b)
转换开关
b) Switcher
c)
数显电压表
c) Digital display voltage meter
d)
数显电流表
d) Digital display current meter
e)
运行指示灯
e) Operation indicator
f)
停止指示灯
f) Stop indicator
