6
CAUTION
IN ORDER TO AVOID INJURY, PROPERTY DAMAGE, AND REDUCED PRODUCT PERFORMANCE.
To dispense ice, place
container close to the ice
dispenser hole, touch the ICE
touch sensor button, and
attempt to keep ice from
being scattered on the floor.
(Do not allow cups to be
inserted into the ice
dispenser hole.)
Do not put foreign materials
into the ice dispenser hole
or block the dispenser hole
(This can become a cause for
system malfunction.)
Do not attempt to operate
the product if installed at
over a 15
。
incline.
(This can be the cause of
malfunction or unwanted
troubles.)
Do not tilt the product over
45
。
during transportation.
(Severe inclination can be
the cause of reduced
performance.)
Do not install the product in
a sloped or unstable position.
(This can be the cause of
reduced performance,
system damaging, or
overall troubles.)
Hot water is extremely hot.
Always use containers
such as cups during hot
water dispensing,
in order to avoid burns.
After transporting the product,
do not supply the product
with power until a minimum
of 30 minutes has
passed for stabilization of
the product.
Do not install the product in
a place where the surrounding
temperature may drop
below 32℉.(0℃)
Before cleaning the inside of
product, always pull out the
power plug.
(There is danger of electric
shock or fire.)
2. Safety Precaution
32F
32F
Summary of Contents for Super Iguassu ice
Page 23: ...23 1 12 2 M Me em mo o...
