Chungho Super Iguassu ice, User Manual

Page: 15 / 24

15
SUPER IGUASSU ICE SUPER IGUASSU ICE
6. Usage
①
This is to be performed with the power plug inserted.
②
Remove the lower cover by first pushing the cover down and then pulling
it forward.Turn on the drainage switch, located at the bottom of the panel,
to remove water remaining in the system.
If the drainage switch is turned on, water purification and ice production
stops.
③
Remove cold water by pressing the water dispense button.
In order to remove the water remaining in the cold water tank, tilt the
product forward and do so until cold water does not come out.
④
Take out the ice by pressing the ICE(ice dispense) touch sensor button.
If there is no other option but to transport the product in an
inclined position, transport the product in a backwards inclined
position if at all possible.
6-6. Draining the System for Relocation/Installation
(1) Ice Dispensing Mode
If ICE(ice dispense) touch sensor button is pressed, the door of the ice
storage house is opened and ice comes out from the dispensing hole.
(2) Hot Water Dispensing Mode
If HOT(hot water selection) touch sensor button is selected and the water
dispensing button is pressed, hot water comes out.
If LOCK function is set, hot water does not come out even though the water
dispensing button is pressed. Release the LOCK function first.
If the hot water operation display LED is turned off, the heater does not
operate so the hot water will not come out.
(3) Cold Water Dispensing Mode
If COLD(cold water selection) touch sensor button is selected and water
dispensing button is pressed, cold water comes out.
(4) Ambient Water Dispensing Mode
If AMBI(ambient water selection) touch sensor button is selected and water
dispensing button is pressed, ambient water comes out.
If hot water or ambient water is selected and it is not used for a given time
period, the system will automatically switch into cold water dispense mode.
(Default function)
There is not a separate setting and release method for the use of ambient
water/cold water/ice making operation. They operate automatically as
esignated by the program when the power is supplied.
6-5. Ice and Water Dispensing Method
Drainage Valve
Drainage Switch