14
(5) Hot(hot water) Operation Setting
If hot water operation display LED(red) is turned on by continuously touching HOT/ECONO
(hot water operation / power saving selection) touch sensor button for 2 seconds the hot
water system will operate.
(Hot water system is operated by a detection sensor which
automatically detects the temperature inside of the hot water tank.)
(6) Hot(hot water) Operation Release
If the hot water operation display LED is turned off by touching HOT/ECONO(hot water
operation/power saving selection) touch sensor button for 2 seconds, then the hot water
system stops.
Cautions during Use of Power Saving Function
If power saving function is selected, the hot water system is automatically turned
on/off according to brightness of the products surroundings, so hot water can not
be immediately used after it becomes bright again around the product. Therefore,
in order to use hot water all the time, do not use the power saving function.
(7) ECONO(power saving) Function Setting
①
Touch the HOT/ECONO(hot water operation/power saving selection) touch
sensor button.
②
Power saving display LED is turned on and power saving function is set.
Power saving function is automatically set to turn on/off the hot water system
through operation of light sensor detection in accordance to the brightness
around the product while hot water function is set.
(8) ECONO(power saving) Function Release
①
Touch the HOT/ECONO(hot water/power saving selection) touch sensor
button.
②
Power saving display LED is turned off and power saving function is released.
(9) CONST.(continuous dispensing) Function Setting
①
Touch the CONST. (hot water operation/power saving selection) touch sensor
button for approximately 2 seconds.
②
When CONST. LED is turned on, select desired water level among which
1l, 1.5l, 4.5l and 8l.
(Upon selection, red LED for the selected water level is lit on.)
Touch COLD/AMBI and water dispenser button for the continuous dispensing function.
(Upon dispensing, red LED for the selected water level is flashing.)
After setting the CONST. function, the setting will be abandoned if water is not
dispensed in 10 seconds.
CONST. function is not available on hot water dispensing.
(10) CONST.(continuous dispensing) Function Release
During continuous dispensing, touching CONST., COLD, AMBI, or water dispenser
button will cancel CONST. function.
(Upon releasing the CONST. function, selected red LED will be turned off.)
3
Operation conversion when
touching the HOT/ECONO(hot
water operation/power saving
selection) touch sensor button.
6. Usage
CONST.
Summary of Contents for Super Iguassu ice
Page 23: ...23 1 12 2 M Me em mo o...
