15
•
Press"HOT/ECONO" touch button
for 2 seconds
.
(9) Beep function releasing
①
Press "HOT/ECONO." and "WARM" touch button for 3 seconds.
②
Beep sound is released. (Releasing sound: Ding~Ding~Ding~Ding~Ding)
③
LED of "ICE/LOCK" and "HOT/ECONO" flickers 5 times by 1 second interval.
(10) Beep function resetting
①
Press "HOT/ECONO." and "WARM" touch button for 3 seconds.
②
Beep sound is set. (Setting sound: Ding~Ding~Ding~Ding~Ding)
③
LED of "ICE/LOCK" and "HOT/ECONO" flickers 5 times by 1 second interval.
(11) Dazzling LED light on the front ON/OFF function while dispensing ice and water
①
LED on the front is blinking while ice and water are being served.
②
"ICE/LOCK" and "WARM" are pressed for over 3 seconds, LED on the front can be
ON/OFF.
※
Even LED is off, it blinks while ice and water are being served.
(5) Hot water operation setting
①
Press "HOT/ECONO" for 2 seconds.
②
Press down until "HOT" LED(Red) is turned on.
③
Hot water operation works as turning on “HOT” LED.
※
Hot water system is operated by a detection sensor which automatically detects the
temperature inside of the hot water tank.
(6) Hot water operation releasing
①
Press "HOT/ECONO" for 2 seconds.
②
Press down until "HOT" LED(Red) is turned off.
③
Hot water operation stops working as turning off “HOT” LED.
(7) Power saving function setting
①
Press "HOT/ECONO" for 2 seconds.
②
Press down until "ECONO" LED(Red) is turned on.
③
Power saving function starts working as turning on "ECONO" LED.
※
While operating hot water, light detection sensor reacts to the light density (CDS sensor)
and it controls heater operation. When it is dark, it sends a signal of stopping operation
of the heater. This function is very useful for an empty office after business hour, closed
restaurant and night at home. If it gets bright around the products (Light is turned on or so.),
hot water operation sets back into motion automatically.
(8) Power saving function releasing
①
Press "HOT/ECONO" for 2 seconds.
②
Press down until "ECONO" LED(Red) is turned off.
③
Power saving function stop working as turning off "ECONO" LED.
•
HOT/ECONO function is available only when LOCK is released.
•
Cautions for use of power saving function
If power saving function is selected, the hot water system is automatically turned
on/off according to brightness around the product, so hot water cannot be
immediately served after it becomes bright again around the product. Therefore, do
not use the power saving function in order to use hot water all the time.
6. Usage
T-461_영문매뉴얼_T_461_메뉴얼_5170S 12. 4. 10. 오후 4:32 페이지 16
