background image

Tulip-shaped crystal-clear ice

This product is a new water purifier that makes the tulip-shaped crystal-clear ice by advanced ice making

technology.

24 Hour Natural Water Circulation System(N.W.P.W)

ChungHo Nais purification system is designed to allow water to continuously flow for 24 hours within the

water purifier by adopting a natural circulation method. This mode, entitled N.W.P.W. applies the natural

weight of water pressure in order to always supply clean and fresh water. (patent : No.105585)

Water Purification System Providing an Integrated Ice Making Function

IGUASSU T-461 is an innovative hybrid of a reverse osmosis water purification system with an ice maker

which is utilizing the freezing point method. It is designed not only for a user convenience, but also for a

system efficiency which is intended to obtain cold water as a result of making ice. Hot, cold, ambient, warm

water(40

O

C~50

O

C) and ice are all in one.  

(Patent application: No.2005-99663, 2005-365293, 200510127096.9, 11/342,117)

Pure ice by freezing point depression method

It produces only pure ice by freezing point depression method, which supplies purified water to ice mak-

ing unit. This method allows the pure water to freeze at 32 °F(0 °C) while non-pure water freeze at below

that. 

Energy Saving Function

Cold water is made while making ice simultaneously. This allows the system to maintain a constant cold

water temperature, prevent water waste and help to conserve energy.

Automatic Ice Dispenser

An integrated motor of IGUASSU T-461 enables users to easily take ice by pressing 'ICE' touch button.

Touch Sensor Application

Unlike ordinary button applications, IGUASSU T-461 has a built-in touch sensor buttons. The easy-touch

sensor application is designed for effortless and enjoyable drinking water with ice.

Water Level Detection Sensor

Differed from ordinary float level sensor, an capacitive sensor is used for improving water level detection

accuracy without a float. Capacitive sensor stably detects water level in more reliable and safer way.

The signal from the sensor is sent to a controller in order to automatically adjust purified water level.

Constant Water Dispensing Function

It enables users to take ambient or cold water constantly by selecting "CONST." touch button (Hot water

is not available for constant water dispensing function.)

Diagnostic Testing through USB port

This product is equipped with a USB port in the front of the unit to connect a diagnostic testing device. 

Operation by Sensor and Micom

Room temperature sensor, ice making sensor and ice full sensor are built in the machine. 

Ice making, deicing, and cold water making are operated automatically by Micom and maintain it at an

optimized operation environment. 

03

1. Product features 

1

2

3

4

5

6

7

8

9

10

11

T-461_영문매뉴얼_T_461_메뉴얼_5170S  12. 4. 10.  오후 4:32  페이지 4

Summary of Contents for Iguassu T-461

























Reviews: