12
Connect tube to drain and brine on the back of the product. And then, connect-
tubes to drain hole such as sink, toilet etc.
※
Install the brine water and drain water line separately. If drainage does not
function properly due to improper installation, it can cause water overflowing
up to the water gutter.
※
Brine water or drain water can easily be used for other purposes, such as bath-
room cleaning, house cleaning, laundering, washing, etc.
Fix the tubes not to splash around areas with water.
Turn on water supply valve connected to the house and position the adapter(source
water valve) "OPEN".
Do not plug in the power for 30 minutes in order to stabilize the cooling system
and safe use of product.
Check if water is supplied into the product properly and there are any leakages
on every connection.
Check every connection part for leaks.
After 1 hour has passed from supplying the power, check if water is coming out
by pressing the water dispensing button.
Install horizontally.
Shut off water supply valve and separate the connector part of tap water in order to
connect an adapter(source water valve). Then, connect the adapter(source water valve).
※
If a sealing rubber(packing) is missing or the thread of a screw is damaged,
it may occur water leakage.
Connect the adapter(source water valve) and a water inlet on the rear of the product
with a tube.
5. Installation method
1
2
3
4
5
6
7
8
9
10
30 Minutes
Fix hose!
T-461_영문매뉴얼_T_461_메뉴얼_5170S 12. 4. 10. 오후 4:32 페이지 13
