29
Troubleshooting
Is "HOT"
(hot water operation) is on?
Is water in
ambient water tank?
Americano is not
hot enough.
Set "Hot tank heating"
(hot water operation)
Hot water is being
produced.
(It takes about 3 minutes.)
Wait until the hot water
tank becomes hot enough.
Wait until the water level of ambient
water tank reaches at operating
point for hot and cold water. After
given time, if problem still occurs,
request follow up service.
Have you inserted
capsule?
Have you taken water more
than 2 ℓ in a short time?
Coffee is not
extracted.
Insert coffee capsule
and extract.
Request follow-up
service.
Request follow up service.
Wait until the water level of
ambient water tank
reaches at operating point
(It takes about 30 minutes.)
Have you taken water
more than 1 ℓ at a time?
Upon pressing
“POWER” button for
coffee, "Water Drop"
LED blinks 2 times
and it is turned off.
Ambient water is being
produced.
(It takes about 1 hour.)
After given time, "Water Drop"
LED blinks 2 times and it is
turned off, then request
follow up service.
Symptoms
Check points
No
Yes
*
After the system power source is interrupted and then again restarted, irregular ice may temporarily be served.
*
Contact our distributor if symptom is not solved.
Have you taken hot water
more than 1 ℓ at a time?
When a silicon tube is contaminated by using for an extended period of time,
request follow up service.
How to maintain
a silicon tube?
When hot water is
not hot enough and
hot water is not
served.(When taking
hot water)
Wait until the water level of ambient
water tank reaches at operating point
for hot and cold water.
If problem still occurs, request
follow up service.
Is "HOT"
(hot water operation) is on?
Is water in
ambient water tank?
Hot water is being
produced.
(It takes about 3
minutes.)
Press “HOT SELECTION
BUTTON” to start WARM-UP.
Wait until the hot water
tank becomes hot enough.
Have you taken hot water
more than 0.5 G (1 ℓ)
at a time?
Is water in ambient
water tank?
When cold water is
not cold enough and
cold water is not
served.(When taking
cold water)
Cold water is being
produced.
(It takes about 40
minutes.)
Wait until the water level of ambient
water tank reaches at operating
point for hot and cold water. After
given time, if problem still occurs,
request follow up service.
When ambient
water is not served.
Is tap water being
supplied?
Wait until the tap water
works as the unit unplugged.
Request follow up service.
Is the power plug
inserted properly?
When the display
is not turned on
and not operated.
Insert the power plug into
wall outlet properly.
Is the HOT LOCK (hot water
lock) function set?
When hot water is not
served even though
"HOT" touch button
has been selected.
Request follow up service.
Release HOT LOCK
function.
Request follow up service
when you still have problem even
the power plug is inserted properly.
휘카페 4_영문매뉴얼_*이과수공기청정기-수정 16. 2. 22. 오후 2:48 페이지 31
Summary of Contents for CHP-5350DL
Page 32: ...30 Memo 4_ _ 16 2 22 2 48 32...
