06
● If there is dust, water or etc.
on the power plug pin, wipe it
off well.
(Wipe it off dust, water or etc. on
the power plug pin before con-
nection.)
30 Minutes
● After transporting the unit, do
not supply the power for at
least 30 minutes to stabilize the
unit.
● To disconnect the unit, be sure
to pull by the plug and not the
cord.
(Be sure to pull by the plug, not
the cord to disconnect the unit.)
● After installation, arrange the
power cord so that it will not
be stepped on or stepped
over.
● Do not put any covering on the
rear and side of the unit.
Blocking ventilation holes may
raise inside temperature and
cause system malfunction
or even system stoppage.
● Do not install the unit in or
around largely damp areas,
at a place near flammable
materials, or at a place
exposed to rain or snow.
(There is danger of an
electric shock or fire.)
Symptoms under normal operations
1. During use of the unit, a murmuring water-flow sound, a clattering ice dropping sound, etc. may occur
during cold water making process or ice making process.
2. Opaque ice may occasionally be served, but there is no abnormality in unit performance or ice quality.
3. TDSs (Total Dissolved Solids) found in ambient water, cold water, and ice may vary from one another.
(This is a result of the freezing point method.)
4. After the system power source is interrupted and then again restarted, irregular ice may temporarily be
served.
● Keep tube fixed properly so as not to
splash around area with water from brine tube.
Associated with the possibility of injury, property damage and reduced performance of unit.
Caution
Safety precautions
휘카페 4_영문매뉴얼_*이과수공기청정기-수정 16. 2. 22. 오후 2:47 페이지 8
Summary of Contents for CHP-5350DL
Page 32: ...30 Memo 4_ _ 16 2 22 2 48 32...