19
Usage
●
Standby heating water dispensing mode
1. Set heating mode as standby heating.
2. Please touch the "HOT"(Hot water selection) touch button.
*
Hot water LED blinks(Yellow).
*
2.5 minutes are taken until completion of standby heating.
*
Dispensing the hot water is available after completion of
standby heating for 10 minutes.
3. LED is changed in accordance with standby heating process as below.
Yellow → Orange → Red
*
When standby heating function is completed, "HOT" LED blinks(Red)
with beep sound.
4.
If "HOT" touch button is selected and "WATER DISPENSING
BUTTON" is pressed, hot water is served.
●
Hot water function releasing
Set the switch to O on the rear of the unit.
* If it is not pre-heated, the hot water cannot be dispensed.
*
When taking hot water constantly, temperature of water can be below 50
°C
. Then, hot water is not
served automatically.
*
When the unit stops dispensing hot water, standby heating starts off automatically.
Standby heating Level
Yellow
Orange
Red
Level 1
Completion of standby heating
Hot water temperature
Under 60 °C
Level 2
60 ~ 85 °C
More than 85 °C
Smart cleaning function
It is the function to automatically clean the inside of the water tank in order to prevent the contam-
ination during the time when people seldom use the unit once every 4 days (UV unit) / 15 days
(Normal unit)
●
It operates same time every 4 days / 15 days, as it is set the standard time
which is 12 hours later after connection of power.
e.g.) When the power is connected at 2 P.M, it is operated at 2 A.M
every 4 days / 15 days. If users want to change the operation time,
turn off the power at desired time and turn on.
1. Water dispensing LED blinks around 9 minutes and users cannot use the
unit at this time.
2. Use the unit when this function is finished and cold/ambient water tanks
are filled again. (Around 60 minutes until water full.)
휘카페 4_영문매뉴얼_*이과수공기청정기-수정 16. 2. 22. 오후 2:48 페이지 21
Summary of Contents for CHP-5350DL
Page 32: ...30 Memo 4_ _ 16 2 22 2 48 32...
