The control panel has a RFID reader for unlocking the electronic door lock
by disarming the system. Just place the RFID tag close to the RFID reader,
the green LED indicator flashes once.
The system is disarmed and the electronic door lock is open (If connected)
2. Access Control System
3. Dialing Calls
The control panel has a built-in call module. Make sure the PSTN land line
is connected and the credit is enough, you can use the panel to make calls.
When the control panel is in Disarm or Home Mode state, press
[Call
]
[Call
]
button, input the phone number and press
button
again, the line will get through. If you input wrong numbers, press
[Esc]
button and input again. Press
button to cancel dialing or press
[Esc]
[Call
]
button to end a conversation.
4. Voice Memo
Press the
button to record 10 seconds voice
[Record Voice Memo ]
message. The Play Voice Memo circle will be flashing in blue to remind
you. Users can touch the center of circle to listen to the voice memo. The
LED indicator blacks out when the voice memo has been played. Replay
by touching it again.
5. Function Setting
Input the admin code, and then press
to enter setting menu.
[Enter]
Up
Confirm
Enter
Down
Back to last step
Esc
LCD Display Contents
System Status
Display content
Stand-by
Arm or Disarm
Alarm
Line Disconnect
AC Power Failure
Panel Low Battery
System
Arm
System
Disarm
System
Home Arm
Remote
Arm
Remote
Disarm
Remote
Home Arm
RFID 1-50(RFID Name)
Disarm
Alarm
SOS
Alarm
Linecut
Alarm
Panel Tamper
Alarm
Sensor Tamper
Alarm
Wired Sensor
Alarm
Sensor 1-50(Sensor Name)
10
9
Sensor 1-50(Sensor Name) Low Battery
