Precautions
To prevent harm to users or other people during usage of the product and
to extend the lifespan of the product, please follow the precautions below:
General Instruction
The wireless accessories should be connected to the control panel before use.
Low power voltage would affect transmitting distance range.
2 cells of 3.7V/800mAh battery backup or standard power adapter for power supply.
All accessories from our company are compatible with this control panel.
Do not press SOS key if there is no emergency to avoid disturbing neighborhood.
Check the system regularly to ensure the system works properly in case of emergency.
The control panel is neither waterproof nor moisture-proof, please install it in a shady,
cool and dry place.
The case of the control panel is made of ABS. Please keep it away from strong light
for a longer lifespan.
Forbiddance
The control panel is non explosion-proof. Please keep it away from fire, flame sources.
Install the control panel away from objects such as heater, air conditioner, microwave
oven etc. that produces heat or electric-magnetic.
Forbiddance of Decomposition
Take the control panel for disposal of recycling according to the local regulation.
Disassembly for this product can not be done by non-professionals.
FAQ
Phenomena
Cause of Malfunction
Troubleshoot Method
No response from
control panel
operation
Accessories cannot
connect to control
panel
No response from
the control panel
by operating
remote control
RFID card/tag fail
to disarm
Touch keyboard fail
to make related
setting
Power switch is off
A/C Power failure
Lithium battery backup
power exhausted
Panel not in learning
status
Accessories not triggered
for learning
When learning, 2 beeps
are heard from panel
Remote control is not
learned to control panel
Out of range between
remote control and panel
RFID car/tag not connected
to the panel
Not logged onto the
setting menu.
Open battery compartment,
turn on the power
Contact local main power
supply bureau
Connect to main power with
adapter
Make sure the panel set in
learning status
Make sure the triggered
accessories transmitting signal
to panel for learning
This means accessory has
been coded already
Follow the manual and connect
the remote control to panel
No more than 80 meters in
open area
(no interference)
Signal repeater could be added
Follow the work manual and
code RFID card/tag to the panel
Input the correct admin code,
press
and log on menu
[ Enter ]
setting
32
31
