Chuango CG-A11, User Manual

Page: 11 / 28

Log on the menu, press or , choose “Accessories”, press . [ ] [ ] [Enter]
Press or , choose “RFID Tag”, press . [ ] [ ] [Enter]
Press or , choose “Add”, press . [ ] [ ] [Enter]
LCD display will show “Please connect”, put the RFID tag close to the RFID
reader on the control panel. When a beep is heard, LCD display will show
“RFID (01-50)”, connection succeeded.
1
2
3
4
Log on the menu, press or , choose “Accessories”, press . [ ] [ ] [Enter]
Press or , choose “Remote & Keypad”, press . [ ] [ ] [Enter]
Press or , choose “Add”, press . [ ] [ ] [Enter]
LCD display will show “Please connect”, press any button from the remote
control to enable signal transmitting to the control panel. When a beep is
heard, LCD display will show “Remote (01-10)”, connection succeeded.
1
2
3
4
2. Add/Delete/Edit Accessories
The control panel only receives signal from accessories after they are
connected to the control panel.
Add/Delete Remote Controls or Wireless Keypads
Add
Delete
If user wants to delete the added remote controls or RFID wireless keypads,
please choose “Delete” in the step
as above and press . Then [Enter]
choose to delete all or specific remote controls or wireless keypads, press
[Enter] again.
3
Add/Delete/Edit RFID Tags
Add
Log on the menu, press or ,choose “Accessories”, press . [ ] [ ] [Enter]
Press or , choose “Wireless Sensors”, press . [ ] [ ] [Enter]
Press or , choose “Edit”, press . [ ] [ ] [Enter]
Press or , choose “Sensor 01-50”, press . [ ] [ ] [Enter]
Press or , choose “Edit Sensor Type”, press . [ ] [ ] [Enter]
Press or , choose one type of “Normal Sensor/ 24 Hour Sensor/ [ ] [ ]
Delay Sensor/ Home Sensor ”, press . [Enter]
1
2
3
4
5
6
Delete
If user wants to delete the added RFID cards or tags, please choose
“Delete” in the step as above and press
. Then choose to delete [Enter]
all or specific RFID cards or tags, press again. [Enter]
3
Edit
If user wants to rename the added RFID cards or tags, please choose “Edit
Name” in the step as above and press
, then input the name. [Enter]
3
Add/Delete/Edit Wireless Sensors
Log on the menu, press or , choose “Accessories”, press . [ ] [ ] [Enter]
Press or , choose “Wireless Sensors”, press . [ ] [ ] [Enter]
Press or , choose “Add”, press . [ ] [ ] [Enter]
LCD display will show “Please connect”, trigger the detector once to make
it send wireless signal to the control panel. When a beep is heard, LCD
display will show “Sensor (01-50)”, connection succeeded.
1
2
3
4
Add
Delete
If user wants to delete the added sensors, please choose “Delete” in the
step as above and press
. Then choose to delete all or specific [Enter]
wireless sensors, press again. [Enter]
3
Edit
Type of Sensors
Note!
If two beeps is heard when coding , the accessory is coded already.
16 15
Note!
When adding wireless keypad to control panel, please enter access code and then
press "arm" or "disarm" button on the wireless keypad. When a "beep' is heard, the
system is connected to the panel successfully.