Chuango CG-A11, User Manual

Page: 12 / 28

1
2
3
Normal Sensor: In armed mode, when normal sensors are triggered,
alarm system will alarm. In disarmed mode, when normal sensors are
triggered, alarm system will not alarm.
24 Hour Sensor: Under any circumstances, when 24 Hour Sensors are
triggered, alarm system will alarm at once.
Delay Sensor: If user wants to use the entry and exit delay, related sensors
need to be set in entry and exit delay zone. When setting is done, after set
delay time, those sensors will make system alarm. Refer to Entry and
Delay Setup for details.
Home Sensor: In home mode, only normal sensors will be triggered for
alarming while home sensors will not be triggered. This will allow user to
move freely at home.
If user wants to rename the sensors, please choose “Edit Sensor Name” in
the step and press
. Then input the sensor name. [Enter]
Names of Sensors
5
Test Mode
Test if the sensors are connected successfully to the control panel.
Log on the menu, press or , choose “Accessories”, press . [ ] [ ] [Enter]
Press or , choose “Test Mode”, press . LCD display will [ ] [ ] [Enter]
show “Yes?”, Press again to start testing mode for 10 minutes. [Enter]
Please trigger coded sensors in order, the sensors will transmit signals to
control panel. When 3 beeps are heard, LCD display will collect the
triggering time of the sensors. Then you can count the connected sensors
based on the numbers displayed on the LCD screen. Exit by pressing
[Esc]
button.
3. System Settings
3.1 Date and Time
Press or , choose “Date and Time”, press . [ ] [ ] [Enter]
Press or , choose “Date”, press . [ ] [ ] [Enter]
Input date, press [Enter].
1
2
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Date Format
Press or , choose “Date and Time”, press . [ ] [ ] [Enter]
Press or , choose “Date Format”, press . [ ] [ ] [Enter]
Press or , choose format, press . [ ] [ ] [Enter]
1
2
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Time
The default time is on 24 hours standard.
Press or , choose “Date and Time”, press . [ ] [ ] [Enter]
Press or , choose “Time”, press . [ ] [ ] [Enter]
Input , press . current time [Enter]
1
2
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Date
I
f user is not used to taking along with the remote control, entry and exit
delay could be set in the system. Following is the operation instruction for
arming and disarming.
When entry and exit delay is set, user could exit the house in set time
period, then system will be armed automatically; when user is back
without disarming the system, entry delay will allow time for user to
disarm the system. Otherwise, the system will treat this as an intrusion and
it will be triggered and send out alarming alert.
Note!
The entry and exit delay is only for delay sensors.
18 17
3
4
3
4
3
4
3.2 Entry and Exit Delay