Chuango CG-A11, User Manual

Page: 14 / 28

3.6 Remote Phone Control
Users can set to turn on/off remote phone control to get free access to
the alarm system for arming, disarming and on site monitoring by dialing
telephone no. of the system
Turn On/Off Remote Phone Control
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “Control by Phone”, press . [ ] [ ] [Enter]
Press or , choose “On” or “Off”, press . [ ] [ ] [Enter]
“On” is to turn on phone remote control; “Off” is to turn off phone remote
control.
Default setting is “off”, Remote Phone Control off.
1
2
3
Remote Phone Control Operation
When alarm system is triggered, the control panel will dial pre-stored user
phone numbers. When pick up the phone, users can follow the voice
prompt to control the panel remotely after recorded voice is heard. (See
Instruction Table Below)
Method 1
Method 2
User dials alarm system telephone no.; after getting through, alarm
system will guide you to input access code.
Input access code (user code or admin code); Press
. [ ]
Alarm system plays the voice prompt twice to explain the functions.
User chooses the related instruction to make remote control operation.
(See Instruction Table Below)
1
2
3
4
Note!
Alarm system will hang up after 30 seconds with no operation.
Remote Phone Control Instruction Table
When linecut alarm function is on, the control panel will alarm once the
PSTN land line is cut or pulled out.
Turn On/Off Line Cut Alarm
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
1
2
Press or , choose “Linecut Alarm”, press . [ ] [ ] [Enter]
Press or , choose “On” or “Off”, press . [ ] [ ] [Enter]
“On” is to turn on the linecut alarm; “Off” is to turn off the linecut alarm.
Default setting is “On”, the linecut alarm is on.
3
User can turn on/off keypad tone accordingly.
Turn On/Off Keypad Tone
Log on the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
1
2
Press or , choose “Keypad Tone”, press . [ ] [ ] [Enter]
Press or , choose “On” or “Off”, press . [ ] [ ] [Enter]
“On” is to turn on the keypad tone; “Off” is to turn off the keypad tone.
Default setting is “On”, keypad tone is on.
3
4
Phone
Buttons
Function
Explanation
Press [ ]
Press [ ]
Press [ ]
Press [ ]
Press [ ]
Press [ ]
Press [ ]
Press [ ]
Arm the system
Disarm the system
Monitor on site
Turn on siren
Turn off siren
Turn on relay
Turn off relay
To exit Remote Phone Control
Phone voice prompt “Arm Succeed”
Phone voice prompt “Disarm Succeed”
Press [*] to prolong monitor time
Deter the intruders
Siren stops ringing
Available for the system with RS-1000
relay module
Or hang up the phone
22 21
3.7 Linecut Alarm
3.8 Keypad Tone