Home
/
Chrysler
/
Pacifica 2022
/
Owner'S Manual

Chrysler Pacifica 2022, Owner'S Manual, Page: 270 / 384

Share

Page: 270 / 384

Chrysler Pacifica 2022 Owner'S Manual Download Page 270

268

SAFETY

NOTE:

If the folding, non-adjustable head restraint interferes with the installation of the child restraint, the head restraint may be folded and the child seat installed in

front of it.

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s weight of the child

restraint) for using the LATCH anchorage system to attach

the child restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until the combined weight of the

child and the child restraint is 65 lbs (29.5 kg). Use the seat belt

and tether anchor instead of the LATCH system once the combined

weight is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the seat belt be used

together to attach a rear-facing or forward-facing child

restraint?

No

Do not use the seat belt when you use the LATCH anchorage

system to attach a rear-facing or forward-facing child restraint.
Booster seats may be attached to the LATCH anchorages if allowed

by the booster seat manufacturer. See your booster seat owner’s

manual for more information.

Can two child restraints be attached using a common

lower LATCH anchorage?

No

Never “share” a LATCH anchorage with two or more child

restraints. If the center position does not have dedicated LATCH

lower anchorages, use the seat belt to install a child seat in the

center position next to a child seat using the LATCH anchorages in

an outboard position.

Can the rear-facing child restraint touch the back of the

front passenger seat?

Yes

The child seat may touch the back of the front passenger seat if

the child restraint manufacturer also allows contact. See your child

restraint owner’s manual for more information.

Can the rear head restraints be removed?

Yes

The 2nd row head restraints on bench and the center head

restraint in the 8 passenger vehicle can be removed if they

interfere with the installation of the child restraint. 2nd row Stow 'n

Go head restraints are not removable. The 3rd row center head

restraint is removable in all vehicles, but the 3rd row outboard

head restraints are not removable

22_RUP_OM_EN_USC_t.book Page 268

«
...
268
269
270
271
272
...
»

Summary of Contents for Pacifica 2022

































































































































































































































































































































































































Reviews:

No comments