Chrysler Pacifica 2022 Owner'S Manual Download Page 174

Page: 174 / 384

172

STARTING AND OPERATING

The display will show the entire vehicle cabin view

on the left side of the display, and a zoomed-in

view of a selected seat on the right side of the

display.

FamCam Display (7 Passenger Vehicle Shown)

To change the seat shown in the zoomed-in view,

press a different seat location on the left side of

the display. The zoomed-in view will then show the

new seat location. By default, the second row

driver’s side seat will be displayed in the zoomed-in

view.
The display will appear in color in well-lit conditions

and will appear black and white in low-light

conditions.

If the driver shifts into REVERSE or presses the X

on the screen, the view will close. Otherwise, the

FamCam view will remain on the display.
NOTE:

When FamCam is turned off, the selected seat in

the zoomed-in view on the right side of the display

will be retained. The next time the feature is acti

vated, the same seat will be shown in the

zoomed-in view.

REFUELING THE VEHICLE

There is no fuel filler cap. Two flapper doors inside

the pipe seal the system.

1. Put the vehicle in PARK and switch the

ignition OFF.

2. Push the center-rear edge of the fuel filler door

(3 o'clock position) and release to open.

Fuel Filler Door

3. Insert the fuel nozzle fully into the filler pipe;

the nozzle opens and holds both flapper doors

while refueling.

4. When the fuel nozzle “clicks” or shuts off, the

fuel tank is full.

5. Keep the nozzle in the filler for five seconds

after the nozzle clicks to allow fuel to drain

from the nozzle.

WARNING!



Never have any smoking materials lit in or

near the vehicle when the fuel door is open or

the tank is being filled.



Never add fuel when the engine is running.

This is in violation of most state and federal

fire regulations and may cause the Malfunc

tion Indicator Light to turn on.



A fire may result if fuel is pumped into a

portable container that is inside of a vehicle.

You could be burned. Always place fuel

containers on the ground while filling.

CAUTION!

To avoid fuel spillage and overfilling, do not “top

off” the fuel tank after filling.

22_RUP_OM_EN_USC_t.book Page 172

Summary of Contents for Pacifica 2022

































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2022

Reviews:

Chrysler Pacifica 2022, Owner'S Manual, Page: 174 / 384

Search results

Summary of Contents for Pacifica 2022

Reviews: