Chrysler Pacifica 2022 Owner'S Manual Download Page 62

Page: 62 / 384

GETTING TO KNOW YOUR VEHICLE

UTOMATIC

OWER

OLDING

IRRORS

— I

QUIPPED

When enabled within Uconnect Settings

page 188, the exterior mirrors will automatically

fold when the vehicle’s ignition is placed in the

OFF position, and after the doors are locked and

closed.
The exterior mirrors will auto-fold in the following

situations after the ignition is placed in the OFF

position:



Pushing the lock button on the door panel

before the door is opened.

NOTE:

If the doors are already locked, push the lock

button again.



Opening the door, then pushing the lock button

on the door panel, followed by closing the door.



After exiting the vehicle, close the doors then

push the lock button on the key fob.



After exiting the vehicle, close the doors then

touch the lock icon on the Passive Entry door

handle.

If the exterior mirrors were folded automatically,

they will unfold when the ignition is placed in the

ON/RUN position.
NOTE:

If the mirrors were folded manually, by using the

power folding mirror switch on the driver’s door

panel, they will not automatically unfold.

UTSIDE

IRRORS

OLDING

EATURE

All outside mirrors are hinged and may be moved

either forward or rearward to resist damage. The

hinges have three detent positions:



Full forward position



Full rearward position



Normal position

EATED

IRRORS

— I

QUIPPED

These mirrors are heated to melt frost or

ice. This feature will be activated

whenever you turn on the rear window

defroster (if equipped)

page 72.

ILT

IDE

IRRORS

EVERSE

—

QUIPPED

Tilt Side Mirrors In Reverse provides automatic

outside mirror positioning which will aid the

driver’s view of the ground rearward of the front

doors. The driver's outside mirror will move slightly

downward from the present position when the

vehicle is shifted into REVERSE. The driver's

outside mirror will then return to the original

position when the vehicle is shifted out of the

REVERSE position. Each stored memory setting will

have an associated Tilt Side Mirrors In Reverse

position.
NOTE:

The Tilt Side Mirrors In Reverse feature can be

enabled or disabled through the Uconnect system

page 188.

22_RUP_OM_EN_USC_t.book Page 60

Summary of Contents for Pacifica 2022

































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2022

Reviews:

Chrysler Pacifica 2022, Owner'S Manual, Page: 62 / 384

Search results

Summary of Contents for Pacifica 2022

Reviews: