Chrysler Pacifica 2022 Owner'S Manual Download Page 182

Page: 182 / 384

180

STARTING AND OPERATING

RAILER

ONGUE

EIGHT

Never exceed the maximum tongue weight

stamped on your fascia/bumper or trailer hitch.

Weight Distribution

Consider the following items when computing the

weight on the rear axle of the vehicle:



The tongue weight of the trailer.



The weight of any other type of cargo or

equipment put in or on your vehicle.



The weight of the driver and all passengers.

NOTE:

Remember that everything put into or on the trailer

adds to the load on your vehicle. Also, additional

factory-installed options or dealer-installed options

must be considered as part of the total load on

your vehicle

page 343.

OWING

EQUIREMENTS

To promote proper break-in of your new vehicle

drivetrain components, the following guidelines

are recommended.

Perform the maintenance listed in “Scheduled

Servicing”

page 309. When towing a trailer,

never exceed the GAWR or GCWR ratings.

CAUTION!



Do not tow a trailer at all during the first

500 miles (805 km) the new vehicle is driven.

The engine, axle or other parts could be

damaged.



Then, during the first 500 miles (805 km) that

a trailer is towed, do not drive over 50 mph

(80 km/h) and do not make starts at full

throttle. This helps the engine and other parts

of the vehicle wear in at the heavier loads.

22_RUP_OM_EN_USC_t.book Page 180

Summary of Contents for Pacifica 2022

































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2022

Reviews:

Chrysler Pacifica 2022, Owner'S Manual, Page: 182 / 384

Search results

Summary of Contents for Pacifica 2022

Reviews: