Chrysler Pacifica 2022 Owner'S Manual Download Page 54

Page: 54 / 384

GETTING TO KNOW YOUR VEHICLE

ENTILATED

EATS

— I

QUIPPED

Located in the first row seat cushions are

small fans that draw the air from the

passenger compartment and move air

through fine perforations in the seat

cover to help keep the driver and front passenger

cooler in higher ambient temperatures.

The fans operate at two speeds, HI and LO.
The front ventilated seats control buttons are

located in the touchscreen.



Press the ventilated seat button once to

choose HI.



Press the ventilated seat button a second time

to choose LO.



Press the ventilated seat button a third time to

turn the ventilated seat off.

NOTE:

The engine must be running for the ventilated

seats to operate.
For information on use with the Remote Start

system, see

page 21.

DJUSTABLE

RMREST

RONT

EATS

) — I

QUIPPED

Your vehicle may be equipped with adjustable

armrests on the front seats. The armrest can be

adjusted up or down.
To adjust the armrest height, push and hold the

button while moving the armrest to the desired

position. Release the button to lock the armrest

into place.

Adjustable Armrest Adjustment Button

LASTIC

ROCERY

ETAINER

OOKS

Retainer hooks which will hold plastic grocery bag

handles are built into the seatbacks of the second

row rear seats, and if equipped, the backs of the

front row seats. The floor supports the partial

weight of the bagged goods.

EAD

ESTRAINTS

Head restraints are designed to reduce the risk of

injury by restricting head movement in the event of

a rear impact. Head restraints should be adjusted

so that the top of the head restraint is located

above the top of your ear.

WARNING!



All occupants, including the driver, should not

operate a vehicle or sit in a vehicle’s seat until

the head restraints are placed in their proper

positions in order to minimize the risk of neck

injury in the event of a crash.



Head restraints should never be adjusted

while the vehicle is in motion. Driving a vehicle

with the head restraints improperly adjusted

or removed could cause serious injury or

death in the event of a collision.

22_RUP_OM_EN_USC_t.book Page 52

Summary of Contents for Pacifica 2022

































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2022

Reviews:

Chrysler Pacifica 2022, Owner'S Manual, Page: 54 / 384

Search results

Summary of Contents for Pacifica 2022

Reviews: