Chrysler Automobile User Manual Download Page 70 | Manualshive

Page: 70 / 434

Chrysler Automobile User Manual Download Page 70

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil
in the engine or damage may result.

NOTE:

A new engine may consume some oil during its

first few thousand miles (kilometers) of operation. This
should be considered a normal part of the break-in and
not interpreted as an indication of difficulty.

SAFETY TIPS

Transporting Passengers

NEVER TRANSPORT PASSENGERS IN THE CARGO
AREA.

WARNING!

•

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

70

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
68
69
70
71
72
...
»

Summary of Contents for Automobile



















































































































































































































































































































































































































































Reviews:

No comments