Home
/
Chrysler
/
Automobile
/
User Manual

Chrysler Automobile, User Manual, Page: 110 / 434

Share

Page: 110 / 434

Chrysler Automobile User Manual Download Page 110

General Information

This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:

•

Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.

•

This device may not cause harmful interference.

•

This device must accept any interference received,
including interference that may cause undesired
operation.

VOICE RECOGNITION (VR) SYSTEM — IF
EQUIPPED

Voice Recognition (VR) System Operation

This Voice Recognition system allows you to
control your AM, FM radio, satellite radio, disc
player, and a memo recorder.

NOTE:

Take care to speak into the Voice Interface

System as calmly and normally as possible. The ability of
the Voice Interface System to recognize user voice com-
mands may be negatively affected by rapid speaking or a
raised voice level.

110

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
108
109
110
111
112
...
»

Summary of Contents for Automobile



















































































































































































































































































































































































































































Reviews:

No comments