Chrysler Automobile User Manual Download Page 6 | Manualshive

Page: 6 / 434

Chrysler Automobile User Manual Download Page 6

WARNINGS AND CAUTIONS

This Owner’s Manual contains

WARNINGS

against op-

erating procedures that could result in an accident or
bodily injury. It also contains

CAUTIONS

against proce-

dures that could result in damage to your vehicle. If you
do not read this entire manual, you may miss important
information. Observe all Warnings and Cautions.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is on the left
front corner of the instrument panel and is visible from
outside of the vehicle through the windshield. This
number also appears on the Automobile Information
Disclosure Label affixed to a window on your vehicle, the
vehicle registration, and the title.

NOTE:

It is illegal to remove or alter the VIN.

VIN Location

6

INTRODUCTION

«
...
4
5
6
7
8
...
»

Summary of Contents for Automobile



















































































































































































































































































































































































































































Reviews:

No comments