Chrysler Automobile User Manual Download Page 249

Page: 249 / 434

Downshifting

To maintain a safe speed and prolong brake life, down-
shift to maintain a safe speed when descending a steep
grade.

WARNING!

Skipping more than one gear while downshifting,
could cause you to lose control of your vehicle. You
could have an accident.

CAUTION!

•

If you skip more than one gear while downshift-
ing or downshift at too high an engine speed, you
could damage the engine, transmission, or clutch.

•

Do not downshift into first gear when the vehicle
is moving faster than 15 mph (24 km/h), as you
could damage the engine and/or clutch.

AUTOMATIC TRANSMISSION — IF EQUIPPED

CAUTION!

Damage to the automatic transmission may occur if
the following precautions are not observed:

•

Shift into PARK only after the vehicle has come to
a complete stop.

•

Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the engine
is at idle speed.

•

Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.

•

Before shifting into any gear, make sure your foot
is firmly on the brake pedal.

STARTING AND OPERATING

249

Summary of Contents for Automobile



















































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Chrysler Automobile, User Manual, Page: 249 / 434

Search results

Summary of Contents for Automobile

Reviews: