Chrysler Automobile User Manual Download Page 214

Page: 214 / 434

•

During all List modes, the iPod

威

displays all lists in

“wrap-around” mode. So if the track is at the
bottom of the list, just turn the wheel backwards
(counter-clockwise) to get to the track faster.

•

In List mode, the radio

PRESET

Buttons are used as

shortcuts to the following lists on the iPod

威

•

Preset 1 – Playlists

•

Preset 2 – Artists

•

Preset 3 – Albums

•

Preset 4 – Genres

•

Preset 5 - Audiobooks

•

Preset 6 – Podcasts

•

Pressing a PRESET button will display the current
list on the top line and the first item in that list on
the second line.

•

To Exit List mode without selecting a track, press the
same

PRESET

button again to go back to

Play

mode

•

LIST

button: The

LIST

button will display the top

level menu of the iPod

威

. Turn the

TUNE

control knob

to list the top-menu item you wish to select and press
the

TUNE

control knob. This will display the next

sub-menu list item on the iPod

威

then you can follow

the same steps to go to the desired track in that list.
Not all iPod

威

sub-menu levels are available on this

system.

•

MUSIC TYPE

button: The

MUSIC TYPE

button is

another shortcut button to the genre listing on your
iPod

威

214

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for Automobile



















































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Chrysler Automobile, User Manual, Page: 214 / 434

Search results

Summary of Contents for Automobile

Reviews: