Home
/
Chrysler
/
2012 300 SRT 8
/
Owner'S Manual

Chrysler 2012 300 SRT 8, Owner'S Manual, Page: 98 / 543

Share

Page: 98 / 543

Chrysler 2012 300 SRT 8 Owner'S Manual Download Page 98

NOTE:

Pressing the power folding mirror switch for

more than four seconds, or if the vehicle speed is greater
than 5 mph (8 km/h) will disable the folding feature.

If the mirrors are in the folded position, and vehicle
speed is equal or greater than 5 mph (8 km/h), they will
automatically unfold.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This
feature is activated whenever you turn on the rear

window defroster. Refer to “Rear Window Features” in
“Understanding The Features Of Your Vehicle” for fur-
ther information.

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is located on the sun visor.
To use the mirror, rotate the sun visor downward and
swing the mirror cover upward. The light turns on
automatically. Closing the mirror cover turns off the light.

“Slide-On-Rod” And Extender Features Of Sun
Visor

To use the “Slide-On-Rod” feature of the sun visor, rotate
the sun visor downward and swing the sun visor so it is
parallel to the side window, grabbing the sun visor with
your left hand pull rearwards until the sun visor is in the

Illuminated Vanity Mirror

96

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
96
97
98
99
100
...
»

Summary of Contents for 2012 300 SRT 8
































































































































































































































































































































































































































































































































































Reviews:

No comments