Home
/
Chrysler
/
2012 300 SRT 8
/
Owner'S Manual

Chrysler 2012 300 SRT 8, Owner'S Manual, Page: 118 / 543

Share

Page: 118 / 543

Chrysler 2012 300 SRT 8 Owner'S Manual Download Page 118

phonebook. Specific Bluetooth

威

Phones with Phone Book

Access Profile may support this feature. See Uconnect™
website for supported phones.

•

To call a name from a downloaded mobile phonebook,
follow the procedure in “Call by Saying a Name”
section.

•

Automatic download and update, if supported, begins
as soon as the Bluetooth

威

wireless phone connection is

made to the Uconnect™ Phone, for example, after you
start the vehicle.

•

A maximum of 1000 entries per phone will be down-
loaded and updated every time a phone is connected
to the Uconnect™ Phone.

•

Depending on the maximum number of entries down-
loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if avail-
able, the previously downloaded phonebook is avail-
able for use.

•

Only the phonebook of the currently connected mobile
phone is accessible.

•

This downloaded phonebook cannot be edited or
deleted on the Uconnect™ Phone. These can only be
edited on the mobile phone. The changes are trans-
ferred and updated to Uconnect™ Phone on the next
phone connection.

Managing Your Favorite Phonebook

There are three ways you can add an entry to your
Favorite Phonebook.

1. During an active call of a number to make a favorite,
touch and hold a favorite button on the top of the phone
main screen.

2. After loading the mobile phonebook, select phonebook
from the Phone main screen, then select the appropriate
number. Touch the + next to the selected number to display
the options pop-up. In the pop-up select “Add to Favorites”.

116

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
116
117
118
119
120
...
»

Summary of Contents for 2012 300 SRT 8
































































































































































































































































































































































































































































































































































Reviews:

No comments