Chrysler 2012 300 SRT 8 Owner'S Manual Download Page 231

Page: 231 / 543

Turning ParkView

姞

On Or Off — With Touch

Screen Radio

1. Turn the Radio on.

2. Press the “More” soft-key.

3. Press the “Settings” soft-key.

4. Press the “Safety & Driving Assistance” soft-key.

5. Press the check box soft key next to “Parkview

威

Backup Camera” to enable/disable.

OVERHEAD CONSOLE

The overhead console contains courtesy/reading lights
and storage for sunglasses. Universal Garage Door
Opener (HomeLink

威

) and power sunroof switches may

also be included, if equipped.

Overhead Console

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

229

Summary of Contents for 2012 300 SRT 8
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 300 SRT 8

Reviews:

Chrysler 2012 300 SRT 8, Owner'S Manual, Page: 231 / 543

Search results

Summary of Contents for 2012 300 SRT 8

Reviews: