Home
/
Chrysler
/
2012 300 SRT 8
/
Owner'S Manual

Chrysler 2012 300 SRT 8, Owner'S Manual, Page: 107 / 543

Share

Page: 107 / 543

Chrysler 2012 300 SRT 8 Owner'S Manual Download Page 107

Blind Spot Alert Off

When the BSM system is turned off, there will be no
visual or audible alerts from either the BSM or RCP
systems.

NOTE:

The BSM system will store the current operating

mode when the vehicle is shut off. Each time the vehicle
is started, the previously stored mode will be recalled
and used.

Astronomy Zone — System Temporarily Unavailable

When the vehicle enters this zone the blind spot system
will become temporarily unavailable and the EVIC will
display the message “ Blind spot system unavailable-
Astronomy zone”. The side mirrors LED’s will be lit up
and stay lit until the vehicle exits the zone.

Uconnect™ Phone (8.4/8.4N)

Uconnect Touch™ 8.4/8.4 Nav

Uconnect™ Phone is a voice-activated, hands-free, in-
vehicle communications system. Uconnect™ Phone al-
lows you to dial a phone number with your mobile
phone.

Uconnect™ Phone supports the following features:

Voice Activated Features:

•

Hands Free dialing via Voice (“Call John Smiths Mo-
bile” or, “Dial 248 555-1212”).

•

Hands Free text to speech listening of your incoming
SMS messages.

•

Hands Free text messaging (“Send a message to John
Smiths Mobile”).

•

Redialing last dialed numbers (“Redial”).

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

105

«
...
105
106
107
108
109
...
»

Summary of Contents for 2012 300 SRT 8
































































































































































































































































































































































































































































































































































Reviews:

No comments