Home
/
Chrysler
/
2012 300 SRT 8
/
Owner'S Manual

Chrysler 2012 300 SRT 8, Owner'S Manual, Page: 286 / 543

Share

Page: 286 / 543

Chrysler 2012 300 SRT 8 Owner'S Manual Download Page 286

If the telltale turns on while driving, safely pull over and
stop the vehicle. If the A/C system is on, turn it off. Also,
shift the transmission into NEUTRAL and idle the ve-
hicle. If the temperature reading does not return to
normal, turn the engine off immediately and call for
service. Refer to “If Your Engine Overheats” in “What To
Do In Emergencies” for more information.

•

Transmission Temperature Warning Telltale

This telltale indicates that the transmission
fluid temperature is running hot. This may
occur with severe usage, such as trailer towing.
If this telltale turns on, safely pull over and

stop the vehicle. Then, shift the transmission into NEU-
TRAL and run the engine at idle or faster until the light
turns off.

CAUTION!

Continuous driving with the Transmission Tempera-
ture Warning Telltale illuminated will eventually
cause severe transmission damage or transmission
failure.

WARNING!

If the Transmission Temperature Warning Telltale is
illuminated and you continue operating the vehicle,
in some circumstances you could cause the fluid to
boil over, come in contact with hot engine or exhaust
components and cause a fire.

•

Electric Power Steering Malfunction

This telltale is on when the Electric Power
Steering is not operating and needs service.

284

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
284
285
286
287
288
...
»

Summary of Contents for 2012 300 SRT 8
































































































































































































































































































































































































































































































































































Reviews:

No comments