Home
/
Chrysler
/
2008 Aspen
/
Owner'S Manual

Chrysler 2008 Aspen, Owner'S Manual, Page: 380 / 479

Share

Page: 380 / 479

Chrysler 2008 Aspen Owner'S Manual Download Page 380

WARNING!

Chains are not recommended for freeing a stuck
vehicle. Chains may break, causing serious injury or
death.

WARNING!

Stand clear of vehicles when pulling with tow hooks.
Tow straps and chains may break, causing serious
injury.

CAUTION!

Tow hooks are for emergency use only, to rescue a
vehicle stranded off-road. Do not use tow hooks for
tow truck hookup or highway towing. You could
damage your vehicle.

TOWING A DISABLED VEHICLE

Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use of safety chains is recom-
mended. Attach towing device to main structural mem-
bers of the vehicle — not to bumpers or associated
brackets. State and local laws, applying to vehicles
under tow, must be observed.

WHAT TO DO IN EMERGENCIES

379

6

«
...
378
379
380
381
382
...
»

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Reviews:

No comments