Home
/
Chrysler
/
2008 Aspen
/
Owner'S Manual

Chrysler 2008 Aspen, Owner'S Manual, Page: 122 / 479

Share

Page: 122 / 479

Chrysler 2008 Aspen Owner'S Manual Download Page 122

WARNING!

Adjusting a seat while the vehicle is moving is
dangerous. The sudden movement of the seat could
cause you to lose control. The seat belt might not be
properly adjusted and you could be injured. Adjust
any seat only while the vehicle is parked.

Front Seat Manual Seat Recliners

The bucket seats are equipped with recliners. The reclin-
ing mechanism is operated by a lever located on the right
side of the passenger’s seat and the left side of the
driver’s seat. To recline, lean forward slightly before

lifting the lever, then push back to the desired position
and release the lever. Lean forward and lift the lever to
return the seatback to its normal position. Using body
pressure, lean forward and rearward on the seat to be
sure the seatback is locked.

WARNING!

Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt and
be seriously or even fatally injured. Use the recliner
only when the vehicle is parked.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

121

3

«
...
120
121
122
123
124
...
»

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Reviews:

No comments