Chrysler 2008 Aspen Owner'S Manual Download Page 18 | Manualshive

Page: 18 / 479

Chrysler 2008 Aspen Owner'S Manual Download Page 18

General Information

The Sentry Key

t

system complies with FCC rules Part 15

and with RSS-210 of Industry Canada. Operation is
subject to the following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be
received, including interference that may cause undes-
ired operation.

IGNITION AND STEERING LOCK

In the LOCK position, the steering and ignition systems
are locked to provide anti-theft protection for your ve-
hicle. If the steering wheel is locked, it may be difficult to
turn the key from the LOCK position when starting your
vehicle. Move the steering wheel left and right while
turning the key until it turns easily. The key can be
inserted or withdrawn only in the LOCK position. Push
in on the key in the ignition lock cylinder to rotate to the
LOCK position.

Ignition Switch Positions

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

17

2

«
...
16
17
18
19
20
...
»

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Reviews:

No comments