Home
/
Chrysler
/
2008 Aspen
/
Owner'S Manual

Chrysler 2008 Aspen, Owner'S Manual, Page: 279 / 479

Share

Page: 279 / 479

Chrysler 2008 Aspen Owner'S Manual Download Page 279

The transmission will downshift from OVERDRIVE to
DRIVE if the accelerator pedal is fully depressed at
vehicle speeds above approximately 35 mph (56 km/h).

When To Use TOW/HAUL Mode

When driving in hilly areas, towing a trailer, carrying a
heavy load, etc., and frequent transmission shifting oc-
curs, press the TOW/HAUL button. This will improve
performance and reduce the potential for transmission
overheating or failure due to excessive shifting. When
operating in TOW/HAUL mode, 5th gear (if equipped) is
disabled and 2-3 and 3-4 shift patterns are modified.
Shifts into OVERDRIVE (4th gear) are allowed during
steady cruise (for improved fuel economy) and automatic
closed-throttle downshifts to 3rd gear (for improved
braking) will occur during steady braking.

The TOW/HAUL light will illuminate in the instrument
cluster to indicate when the switch has been activated.
Pressing the switch a second time restores normal opera-
tion. If the TOW/HAUL mode is desired, the button
must be pressed each time the engine is started.

TOW/HAUL Button

278

STARTING AND OPERATING

«
...
277
278
279
280
281
...
»

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Reviews:

No comments