Home
/
Chrysler
/
2008 Aspen
/
Owner'S Manual

Chrysler 2008 Aspen, Owner'S Manual, Page: 125 / 479

Share

Page: 125 / 479

Chrysler 2008 Aspen Owner'S Manual Download Page 125

4-Way Passenger’s Power Seat — If Equipped

The front passenger’s power seat switches are located on
the right side of the passenger seat lower side trim. The
bottom switch controls forward/rearward adjustment.
The top switch controls the seatback recline adjustment.

NOTE:

The 4-way seat does not have an up/down

adjustment.

Heated Seats — If Equipped

This feature heats the driver, front passenger and second
row seats. The controls for the front heated seats are
located on the instrument panel below the climate con-
trols.

The front heated seat system allows the driver and front
passenger to select from two different levels of supple-
mental electrical seat heating, or no seat heating, to suit
their individual comfort requirements.

Front Heated Seat Switches

124

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
123
124
125
126
127
...
»

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Reviews:

No comments