Chrysler 2005 Crossfire Owner'S Manual Download Page 88 | Manualshive

Page: 88 / 288

Chrysler 2005 Crossfire Owner'S Manual Download Page 88

Synchronizing ESP

If the power supply was interrupted (battery discon-
nected or discharged), the BAS/ESP malfunction indica-
tor light may be illuminated with the engine running. To
re-synchronize the ESP, and cancel the malfunction indi-
cator light, the steering angle sensor will need to be
recalibrated.

1. Turn the ignition switch to the ON/RUN position.

2. Rotate the steering wheel to the center position.

3. Rotate the steering wheel completely to the left, and
then rotate the steering wheel completely to the right.

4. Bring the steering wheel back to the center position.

5. The BAS/ESP malfunction indicator light will go out.

If the BAS/ESP malfunction indicator light is still illumi-
nated, the vehicle should be serviced at an authorized
dealer.

ELECTRONIC SPEED CONTROL

The electronic speed control automatically maintains the
set speed by actively regulating the throttle setting. Any
speed above approximately 20 mph (30 km/h) can be
maintained with the electronic speed control by operat-
ing the lever.

88

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
86
87
88
89
90
...
»

Summary of Contents for 2005 Crossfire

































































































































































































































































































Reviews:

No comments