Home
/
Chrysler
/
2005 Crossfire
/
Owner'S Manual

Chrysler 2005 Crossfire, Owner'S Manual, Page: 214 / 288

Share

Page: 214 / 288

Chrysler 2005 Crossfire Owner'S Manual Download Page 214

Cooling System

WARNING!

•

When working near the radiator cooling fan, dis-
connect the fan motor lead or turn the ignition
switch to the OFF position. The fan is temperature
controlled and can start at any time the ignition
key is in the ON position.

•

You or others can be badly burned by hot coolant
or steam from your radiator. If you see or hear
steam coming from under the hood, don’t open
the hood until the radiator has had time to cool.
Never try to open a cooling system pressure cap
when the radiator is hot.

Coolant Checks

Check coolant protection every 12 months (before the
onset of freezing weather, where applicable). If the cool-
ant is dirty or rusty in appearance, the system should be
drained, flushed and refilled with fresh coolant.

Check the front of the radiator and condenser for an
accumulation of bugs, leaves, etc. Clean the radiator and
condenser by gently spraying water from a garden hose
at the back of the radiator core.

Check the recovery bottle tank tubing for condition and
tightness of connection at the bottle and radiator. Inspect
the entire system for leaks.

214

MAINTAINING YOUR VEHICLE

«
...
212
213
214
215
216
...
»

Summary of Contents for 2005 Crossfire

































































































































































































































































































Reviews:

No comments