Chrysler 2005 Crossfire Owner'S Manual Download Page 242

Page: 242 / 288

Body Specifications

Overall Length

159.8 in. (4058 mm)

Maximum Width

69.5 in. (1766 mm)

Maximum Width With
Mirrors

76.9 in. (1954 mm)

Overall Height
Coupe:

51.5 in. (1307 mm)

Roadster:

51.8 in. (1315 mm)

Front Track

58.8 in. (1493 mm)

Rear Track

59.1 in. (1502 mm)

Wheelbase

94.5 in. (2400 mm)

Front Overhang

32.4 in. (822 mm)

Rear Overhang

32.9 in. (836 mm)

Front Ground Clearance

5.0 in. (127 mm)

Rear Ground Clearance

5.8 in. (147 mm)

Turning Radius

32.2 ft. (9.8 m)

Weight
Coupe:

3061 lbs. (1388 kg)

Roadster:

3140 lbs. (1424 kg)

Maximum Vehicle Load

415 lbs. (188 kg)

Luggage Capacity
Coupe:

7.7 cu. ft. (215 l)

Roadster:

6.5 cu. ft. (190 l) - Top Up
3.6 cu. ft. (104 l) - Top
Down

242

MAINTAINING YOUR VEHICLE

Summary of Contents for 2005 Crossfire

































































































































































































































































































Search results

Summary of Contents for 2005 Crossfire

Reviews:

Chrysler 2005 Crossfire, Owner'S Manual, Page: 242 / 288

Search results

Summary of Contents for 2005 Crossfire

Reviews: