Chrysler 2005 Crossfire Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 288

Chrysler 2005 Crossfire Owner'S Manual Download Page 32

•

When the crash sensor detects an impact requiring the
airbags, it signals the inflator units. A large quantity of
nontoxic nitrogen gas is generated to inflate the air-
bags. The airbag covers separate and fold out of the
way as the airbags inflate to their full size. The airbags
then quickly deflate while helping to restrain the
driver and passenger. The airbag gas is vented
through the airbag material towards the instrument
panel. In this way the airbags do not interfere with
your control of the vehicle.

•

The knee impact bolster helps protect the knees and
working with the seat belts, position you for the best
interaction with the airbags.

If a Deployment Occurs

WARNING!

Deployed airbags can’t protect you in another colli-
sion. Have the airbags replaced by an authorized
dealer as soon as possible.

32

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
30
31
32
33
34
...
»

Summary of Contents for 2005 Crossfire

































































































































































































































































































Reviews:

No comments