Chrysler 200 2016 Owner'S Manual Download Page 587

Page: 587 / 706

CAUTION!

Recovery feature:

•

Is to be used by a professional ONLY.

•

Is used only to provide recovery of the vehicle.

•

Is NOT to be used to recover secondary vehicle.

•

Is NOT to be used for transporting the vehicle over
the road, i.e. “Flat Towing”.

Recovery load should:

•

Be applied at constant speed.

•

Be applied parallel to the center line of the length
of the vehicle.

•

Not be an abrupt acceleration.

If you must use the accessories (wipers, defrosters, etc.)
while being towed, the ignition must be in the ON/RUN
position, not the ACC position.

Front Of Vehicle Recovery Points

WHAT TO DO IN EMERGENCIES

585

Summary of Contents for 200 2016



































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 2016

Reviews:

Chrysler 200 2016, Owner'S Manual, Page: 587 / 706

Search results

Summary of Contents for 200 2016

Reviews: