Home
/
Chrysler
/
200 2016
/
Owner'S Manual

Chrysler 200 2016, Owner'S Manual, Page: 142 / 706

Share

Page: 142 / 706

Chrysler 200 2016 Owner'S Manual Download Page 142

RCP monitors the rear detection zones on both sides of
the vehicle, for objects that are moving toward the side of
the vehicle with a minimum speed of approximately
3 mph (5 km/h), to objects moving a maximum of
approximately 20 mph (32 km/h), such as in parking lot
situations.

NOTE:

In a parking lot situation, oncoming vehicles can

be obscured by vehicles parked on either side. If the
sensors are blocked by other structures or vehicles, the
system will not be able to alert the driver.

When RCP is on and the vehicle is in REVERSE, the
driver is alerted using both the visual and audible
alarms, including reducing the radio volume.

WARNING!

Rear Cross Path (RCP) is not a Back Up Aid system.
It is intended to be used to help a driver detect an
oncoming vehicle in a parking lot situation. Drivers
must be careful when backing up, even when using
RCP. Always check carefully behind your vehicle,
look behind you, and be sure to check for pedestri-
ans, animals, other vehicles, obstructions, and blind
spots before backing up. Failure to do so can result in
serious injury or death.

RCP Detection Zones

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
140
141
142
143
144
...
»

Summary of Contents for 200 2016



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments