Chrysler 200 2016 Owner'S Manual Download Page 47 | Manualshive

Page: 47 / 706

Chrysler 200 2016 Owner'S Manual Download Page 47

the DOWN position). To enable the window controls,
push and release the window lockout button again
(setting it in the UP position).

Wind Buffeting

Wind buffeting can be described as the perception of
pressure on the ears or a helicopter-type sound in the
ears. Your vehicle may exhibit wind buffeting with the
windows down, or the sunroof (if equipped) in certain
open or partially open positions. This is a normal occur-
rence and can be minimized. If the buffeting occurs with
the rear windows open, then open the front and rear
windows together to minimize the buffeting. If the
buffeting occurs with the sunroof open, adjust the sun-
roof opening to minimize the buffeting.

TRUNK LOCK AND RELEASE

The trunk lid can be released from inside the vehicle by
pushing the TRUNK RELEASE button located on the
instrument panel to the left of the steering wheel.

NOTE:

The transmission must be in PARK before the

button will operate.

Trunk Release Button

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

45

«
...
45
46
47
48
49
...
»

Summary of Contents for 200 2016



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments