Home
/
Chrysler
/
200 2016
/
Owner'S Manual

Chrysler 200 2016, Owner'S Manual, Page: 144 / 706

Share

Page: 144 / 706

Chrysler 200 2016 Owner'S Manual Download Page 144

NOTE:

The BSM system will store the current operating

mode when the vehicle is shut off. Each time the vehicle
is started the previously stored mode will be recalled and
used.

General Information

This vehicle has systems that operate on radio frequency
that comply with Part 15 of the Federal Communications
Commission (FCC) rules and with Industry Canada
Standards RSS- GEN/210/220/310.

Operation is subject to the following two conditions:

1. The device may not cause harmful interference.

2. The device must accept any interference received,

including interference that may cause undesired op-
eration of the device.

Changes or modifications to any of these systems by
other than an authorized service facility could void
authorization to use this equipment.

SEATS

Seats are a part of the Occupant Restraint System of the
vehicle.

WARNING!

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts. In a collision, people riding in these areas are
more likely to be seriously injured or killed.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

142

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
142
143
144
145
146
...
»

Summary of Contents for 200 2016



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments